Ceramic Coating
Services in Ankeny, IA

Revivify’s advanced self-healing nano coatings

WHAT ISCERAMIC COATING?

Ceramic Coating is a specially formulated state-of-the-art nanotechnology that achieves 100% adhesion to the surfuce of your vehicle providing complete protection against UV rays, chemicals, road grime, and dirt with heat activated self-healing capabilities.

WHICH CERAMIC PRODUCTDO WE USE?

Revivify – the most sophisticated nano ceramic coating on the market today. Looking for the ultimate surface protection for ANY condition? Not all Ceramic Coatings are the same. That is why at DSM Auto we only use the most hydrophobic nano-tech on the market today. Revivify is the most advanced state-of-the-art paint protection product on the market as of this writing.
 

SELF LEVELING THICK COAT

Specially formulated to provide a true single thick layer and to eliminate application errors. Ensuring 100% consistency with each application.

UNBELIEVABLY STRONG

Once applied the coating achieves 100% adhesion to the surface with 100% resistance against UV with an exceptional chemical resistance. SGS tested.

TIMED ACTIVATION

Under 30 degrees celsius, the hydrophobic & self-healing functions will be active in one hour and 24 hours for those properties to be fully cured.

BREAKTHROUGH CHEMICAL BONDING

Breakthrough in nanotechnology with SI0x allowing extreme adhesion on surfaces such as paint, PPF, steel, chrome, vinyl and glass.

LAB CREATED TOP SECRET FORMULA

Formulated with detailers in mind. REVIVIfy offers an extremely user-friendly application without the headaches of chasing high-spots.

SELF HEALING NANO TECH

Activated with heat, hot air, or hot water. There are no limits to how many times the coating can restore itself from minor scratches and swirl marks.

CERAMIC COATINGPROCESS

Detailed Wash
DSM Auto thoroughly washes your car to remove all transportation dirt (road grime), using the safest method to ensure no damage is done. We are experts at detailing any and all vehicles and restoring them to better than new condition.
Iron Decontamination
Iron removal process, including rail dust from manufacturer to dealer transport on trains, road and wind dust from trailer transports as well as left over brake dust from new brake pad residue particulates.
Clay Bar Wash
Even after the wash, decon, and spot removal, the paint will still have contaminates within it such as stains, tar, tree sap or other environmental chemicals. Knowing this, we then provide a meticulously executed clay bar wash "done by hand" to remove any paint contaminates left over.
Master Blaster Drying
Now that the surface of the paint has been completely gone over it is time to dry. We use a Master Blaster that drys all paint, wheels, tires, and door jambs and simultaneously purges all water from cracks and crevices with air. We then hand dry using clean, plush microfiber towels.
Panel, Plastic, Chrome & Window Prep
There is more to a vehicle than just paint. You have the wheels, bumpers, fenders, different plastics or chromes and of course the windows. Depending on the surface type, we do a final wipe down to remove any previous wax or sealants from those surfaces on the vehicle and prepare it for the final prep stage.
Steam the Paint
The final step before the application of the Ceramic Coating is steaming down the paint. This is going to bring to the surface any leftover contaminates, water stains/spots, oils, residues, and fillers in the paint itself. This step is critical to get that beyond lushes show room shine.
Ceramic Coating Application
This is the application of the chosen level of ceramic coating to all applicable surfaces. We always use new applicator pads and new quality microfiber towels every time in order to insure flawless results.
UV Curing or Coating
These are movable lamps that imitate the process that the sun would provide. Our lamps provide a more accurate and controlled cure due to their articulating capability’s we can get places the sun cannot. This process force cures the ceramic coating for fastest curing time and highest durability.
BEFORE WE APPLY THE CERAMIC COATING
 

BEFOREWE APPLY

These are movable lamps that imitate the process that the sun would provide. Our lamps provide a more accurate and controlled cure due to their articulating capability’s we can get places the sun cannot. This process force cures the ceramic coating for fastest curing time and highest durability.
BEFORE WE APPLY THE CERAMIC COATING
 
So, before we apply the ceramic coating, we may have to perform some level of paint correction to remove the defects in the paint so those defects do not shine thru.

CERAMIC COATING PRICING INANKENY

Packages
Small
Mid Sized
Full Sized
Over Sized
Standard Pro - 3 Year Coating
$800
$900
$1,000
$1,200
Ultimate Pro - 5 Year Coating
$1,000
$1,100
$1,400
$1,800
Pro Shield - 10 Year Coating
$1,500
$1,800
$2,200
$2,600

CERAMIC COATINGADDONS

Ceramic Coated
Wheels

Removal of wheels, detailing of wheel barrels and faces, brake calipers and coating all surfaces.

Starting @ $500

Ceramic Coated
Glass

Ceramic coating of the front 3 windows for ultimate clarity during inclement weather conditions.

Starting @ $150

Interior Ceramic Coating

Help keep the new look and protect the inside of your car with Ceramic Interior Coatings.

Starting @ $500